modellbahn·fokusThe digital reference archive of model railways · A project by Modellbahnshop Lippe
EN
Doehler&HaassSD18A

vehicle sound decoder

Vehicle sound decoder Next 18, Gen2

In the shop

Description

Vehicle sound decoder for SX1, SX2 and DCC

Product features and functions:
- For optional operation with conventional DC traction device, digital systems according to SelecTRIX 1 and 2 or according to the NMRA standard (DCC)
- Switching between analogue and digital operation is automatic
- In digital mode, the last programmed system is used (it is not switched over automatically!)
- SelecTRIX 1 31 speed steps, 100 addresses
- SelecTRIX 2 127 speed steps, 10,000 addresses, 16 additional functions
- DCC short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps
- Load control of the latest generation, resulting in particularly soft control behavior
- Various control variants for optimal adaptation to the engine
- Internal 127 speed steps
- Adjustable motor frequency (low frequency, 16kHz, 32kHz)
- Block section operation with simple diodes in digital operation
- Light and function outputs can be dimmed and activated in the same way as the shunting gear
- Motor, light and track connections can be exchanged electronically
- All function outputs freely programmable temperature protection
- Steam, diesel and electric locomotive sound
- Realistic steam engine sound with wheel-synchronous exhaust blasts, pitch dependent pitch and independent boiling sound
- Realistic diesel-hydraulic driving sound with gear-dependent pitch, variable idle speed and independent acceleration levels
- Realistic diesel-mechanical driving noise with several gears, idling, several driving and acceleration levels including possible switching noise
Realistic electric driving noise with traction motor and traction motor fan as well as switching gear noise, main switch and pantograph possible
- Bell, horn, whistle, close doors, etc. can be triggered separately at any time
- All sound sequences freely configurable ("Function Mapping")
- Speaker connection protected against short circuit and overload
- Low heat generation through the use of the latest technologies
- Reset function for DCC and SX2
- Update capability of the decoder
- Reloadability of the sound data

Attention: Please indicate the desired sound project when ordering.

The update (the firmware download from the Internet is free) is possible when the decoder is installed on the track (the vehicle does not need to be opened) and is carried out exclusively via the programmer.

The vehicle sound decoder SD18A supports braking with asymmetrical digital voltage (four diodes in series and one diode anti-parallel) and bidirectional communication (locomotive address feedback in DCC operation, RailCom).

The vehicle sound decoder SD18A does not support SX1 programming. Please set up the SX1 operation with the SX2 parameter programming.

Please do not forget to order a suitable loudspeaker!

Specifications

Digital-DecoderDCC & Selectrix
Digital InterfaceNext18 digital decoder socket
Dimensions (LxWxH)21,4 * 9,0 * 3,2 mm
Motor connector1000 mA
Memory32 Megabits

Reference data

Manufacturer’s item no.SD18A
EAN2000000209584
ReleasedMitte 2022
ScaleN (1:160)
Era–
Power system–
Railway company–

Market value

Coming soon

The modellbahn·fokus market value index will in future show reference values for both available and discontinued models — transparently derived and continuously updated.

Comments from members (0)

No comments on this model yet – be the first.

Only signed-in members can write comments. Sign in now

Report an error or suggest an addition

Do you know this model better? The editors review every note.

Please sign in to suggest a correction or an addition.