Doehler&HaassPD06A-0
Nano locomotive decoder
Nano locomotive decoder without connecting wires
No longer in the shop
Description
Vehicle decoder for miniature motors 0.2 A / 6 V
Without connecting wires
Product Features and Functions
For optional operation with a conventional DC controller, digital systems according to SelecTRIX 1 and 2 or according to DCC format
Switching between analogue and digital operation takes place automatically
In digital mode, the last programmed system is used (it is not switched over automatically!)
SelecTRIX 1 31 speed steps, 100 addresses
SelecTRIX 2 127 speed steps, 10,000 addresses, 16 additional functions
DCC Short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps
Load control of the latest generation, resulting in particularly soft control behavior
Various control variants for optimal adaptation to the engine
Internally 127 speed levels
Adjustable motor frequency (16kHz, 32kHz)
Block section operation with simple diodes in digital operation
Light and function outputs can be dimmed and activated analogously
shunting gear
Engine, light and track connections can be exchanged electronically
All function outputs freely programmable
temperature protection
Reset function for DCC and SX2
Decoder update capability
Operating mode SX1, SX2, DCC, DC analog
Dimensions [mm] 6.8 * 11.4 * 2.8
Total load 0.5 A
Motor voltage 6 V
Max motor current 0.2A
Max. driving voltage 18 V
LV, LR (dimmable) 150 mA each
AUX1, AUX2 (dimmable) 300 mA each
The vehicle decoder for miniature motors PD06A is a particularly small, vehicle decoder for miniature motors for SX1, SX2 and DCC operation. There are some minor limitations compared to our DH decoder series:
No support of the MM operating mode
No support for SX1 programming (but SX1 operation is possible through SX2 parameter programming)
No SUSI interface
No low-frequency motor control (but 16 kHz or 32 kHz can be selected)
No extended function mappings (ie: no conditions, no initial mapping, etc.)
No automatic clutch sequence
No braking with asymmetrical digital voltage and no slow driving
No braking ramp
Without connecting wires
Product Features and Functions
For optional operation with a conventional DC controller, digital systems according to SelecTRIX 1 and 2 or according to DCC format
Switching between analogue and digital operation takes place automatically
In digital mode, the last programmed system is used (it is not switched over automatically!)
SelecTRIX 1 31 speed steps, 100 addresses
SelecTRIX 2 127 speed steps, 10,000 addresses, 16 additional functions
DCC Short addresses (1-127), long addresses (0001-9999), with 14, 28, 126 speed steps
Load control of the latest generation, resulting in particularly soft control behavior
Various control variants for optimal adaptation to the engine
Internally 127 speed levels
Adjustable motor frequency (16kHz, 32kHz)
Block section operation with simple diodes in digital operation
Light and function outputs can be dimmed and activated analogously
shunting gear
Engine, light and track connections can be exchanged electronically
All function outputs freely programmable
temperature protection
Reset function for DCC and SX2
Decoder update capability
Operating mode SX1, SX2, DCC, DC analog
Dimensions [mm] 6.8 * 11.4 * 2.8
Total load 0.5 A
Motor voltage 6 V
Max motor current 0.2A
Max. driving voltage 18 V
LV, LR (dimmable) 150 mA each
AUX1, AUX2 (dimmable) 300 mA each
The vehicle decoder for miniature motors PD06A is a particularly small, vehicle decoder for miniature motors for SX1, SX2 and DCC operation. There are some minor limitations compared to our DH decoder series:
No support of the MM operating mode
No support for SX1 programming (but SX1 operation is possible through SX2 parameter programming)
No SUSI interface
No low-frequency motor control (but 16 kHz or 32 kHz can be selected)
No extended function mappings (ie: no conditions, no initial mapping, etc.)
No automatic clutch sequence
No braking with asymmetrical digital voltage and no slow driving
No braking ramp
Specifications
Dimensions (L x W)6,8 * 11,4 * 2,8 mm
Reference data
Manufacturer’s item no.PD06A-0
EAN2000003963799
Released05 / 2022
ScaleN (1:160)
Era–
Power systemDC
Railway company–
Market value
Coming soon
The modellbahn·fokus market value index will in future show reference values for both available and discontinued models — transparently derived and continuously updated.
Comments from members (0)
No comments on this model yet – be the first.
Only signed-in members can write comments. Sign in now
Report an error or suggest an addition
Do you know this model better? The editors review every note.
Please sign in to suggest a correction or an addition.



