Description
The function of feedback modules
Feedback modules pass on the information from the track occupancy detector, whether there is a vehicle in the track sections they monitor, to the connected devices (e.g. IB switch) or a computer control program. These automatically execute the switching command that has been stored for this feedback. This can involve switching a single magnetic item or an entire route.
The 2-wire feedback modules consist of an occupancy indicator, a feedback unit and a voltage monitor. The occupancy detectors monitor the track entrances. The current monitoring registers any current flow in the separation section that is greater than 3 mA. This means that locomotives, illuminated wagons and conductive axles are recognized. The voltage monitoring prevents an erroneous free message from occurring when the voltage is switched off. The 3-wire version works with an isolated and separate rail side, which is connected to the annunciator module and connected to ground via the conductive axles of the vehicles. The feedback reports every status change »free« or »occupied« via the LocoNet to the control center and to other LocoNet devices.
In contrast to other bus systems, the LocoNet is designed for the transmission of information, e.g. B. Feedback, extremely safe and reliable. The address is set via a programming button, via the programming menu of the Intellibox or, very conveniently, via the LocoNet Tool software.
- For 8 track sections
- Occupancy indicator, feedback and voltage monitoring in one module
- Maximum driving current 3 A
- Run simple switching applications
Feedback modules pass on the information from the track occupancy detector, whether there is a vehicle in the track sections they monitor, to the connected devices (e.g. IB switch) or a computer control program. These automatically execute the switching command that has been stored for this feedback. This can involve switching a single magnetic item or an entire route.
The 2-wire feedback modules consist of an occupancy indicator, a feedback unit and a voltage monitor. The occupancy detectors monitor the track entrances. The current monitoring registers any current flow in the separation section that is greater than 3 mA. This means that locomotives, illuminated wagons and conductive axles are recognized. The voltage monitoring prevents an erroneous free message from occurring when the voltage is switched off. The 3-wire version works with an isolated and separate rail side, which is connected to the annunciator module and connected to ground via the conductive axles of the vehicles. The feedback reports every status change »free« or »occupied« via the LocoNet to the control center and to other LocoNet devices.
In contrast to other bus systems, the LocoNet is designed for the transmission of information, e.g. B. Feedback, extremely safe and reliable. The address is set via a programming button, via the programming menu of the Intellibox or, very conveniently, via the LocoNet Tool software.
- For 8 track sections
- Occupancy indicator, feedback and voltage monitoring in one module
- Maximum driving current 3 A
- Run simple switching applications
Reference data
Manufacturer’s item no.63320
EAN4033405633203
ScaleNeutral
Era–
Power systemDC
Railway company–
Market value
Coming soon
The modellbahn·fokus market value index will in future show reference values for both available and discontinued models — transparently derived and continuously updated.
Comments from members (0)
No comments on this model yet – be the first.
Only signed-in members can write comments. Sign in now
Report an error or suggest an addition
Do you know this model better? The editors review every note.
Please sign in to suggest a correction or an addition.

