Description
• Motorized switch drive with pulse control, replacement for MP6
• Universal connection as an electromagnetic switch
• Pulse control
• 4 stroke levels 3, 6, 9 and 12 mm
• 1x independent switching contact + 2x feedback
• Convenient installation with removable plug
The stroke can be adjusted in four levels of 3, 6, 9 and 12 mm via the position of the pin in the holder. The coupling mechanism ensures a smooth approach to the end position and its locking.
The MP8 switch drive serves as a replacement for the standard two-coil switch, with short pulse control. The supply voltage is 9-14V DC, which must be applied permanently (+V and -V). The transfer to the end position takes place via a memory relay, which is activated by a short pulse (min 40ms) from the control unit/switch. The pulse inputs are two POS1, POS2, the movement is started by switching the input to voltage -V (common zero point). The electronics of the slider ensure a smooth switchover and travel to the end position, even if the control pulse has already expired. The outputs (fb1, fb2) are intended to signal the end position of the switch using an LED or a light bulb, these contacts switch when the negative pole of the voltage (-V) is reached. The outputs for the electronics can possibly be used as feedback of the device position.
For additional use, the drive is equipped with a potential-free switching contact with a power of 1A. Limit switches and relays ensure the limit switch even after the interrupted power supply returns.
replaces 73714
• Universal connection as an electromagnetic switch
• Pulse control
• 4 stroke levels 3, 6, 9 and 12 mm
• 1x independent switching contact + 2x feedback
• Convenient installation with removable plug
The stroke can be adjusted in four levels of 3, 6, 9 and 12 mm via the position of the pin in the holder. The coupling mechanism ensures a smooth approach to the end position and its locking.
The MP8 switch drive serves as a replacement for the standard two-coil switch, with short pulse control. The supply voltage is 9-14V DC, which must be applied permanently (+V and -V). The transfer to the end position takes place via a memory relay, which is activated by a short pulse (min 40ms) from the control unit/switch. The pulse inputs are two POS1, POS2, the movement is started by switching the input to voltage -V (common zero point). The electronics of the slider ensure a smooth switchover and travel to the end position, even if the control pulse has already expired. The outputs (fb1, fb2) are intended to signal the end position of the switch using an LED or a light bulb, these contacts switch when the negative pole of the voltage (-V) is reached. The outputs for the electronics can possibly be used as feedback of the device position.
For additional use, the drive is equipped with a potential-free switching contact with a power of 1A. Limit switches and relays ensure the limit switch even after the interrupted power supply returns.
replaces 73714
Reference data
Manufacturer’s item no.74318
EAN2000004538316
ScaleH0 (1:87)
Era–
Power system–
Railway company–
Market value
Coming soon
The modellbahn·fokus market value index will in future show reference values for both available and discontinued models — transparently derived and continuously updated.
Comments from members (0)
No comments on this model yet – be the first.
Only signed-in members can write comments. Sign in now
Report an error or suggest an addition
Do you know this model better? The editors review every note.
Please sign in to suggest a correction or an addition.



