Description
Curved track R1, 22.5°, radius 914.4 mm.
Standard arc R1. The angle is 22.5°, radius is 914.4 mm. 16 pieces of track are required for a circle.
The new profile used by PECO has a slightly different geometry than the original profile. The height is the same, but the profile is more delicate and closer to the original. The previous profile on the left, the new profile on the right: with the appropriate rail connectors.
If you want to connect the two different profiles with each other, you may have to rework the respective rail connectors a little.
If a PECO connector is to be attached to an existing profile, bend the connector open slightly with a fine screwdriver.
Standard arc R1. The angle is 22.5°, radius is 914.4 mm. 16 pieces of track are required for a circle.
The new profile used by PECO has a slightly different geometry than the original profile. The height is the same, but the profile is more delicate and closer to the original. The previous profile on the left, the new profile on the right: with the appropriate rail connectors.
If you want to connect the two different profiles with each other, you may have to rework the respective rail connectors a little.
If a PECO connector is to be attached to an existing profile, bend the connector open slightly with a fine screwdriver.
Reference data
Manufacturer’s item no.45021
EAN4044955450219
Scale0
Era–
Power systemDC
Railway company–
Market value
Coming soon
The modellbahn·fokus market value index will in future show reference values for both available and discontinued models — transparently derived and continuously updated.
Comments from members (0)
No comments on this model yet – be the first.
Only signed-in members can write comments. Sign in now
Report an error or suggest an addition
Do you know this model better? The editors review every note.
Please sign in to suggest a correction or an addition.



