LUX9775
rail and overhead line grinding cars
Rail and overhead line grinding car with control electronics (automatic start/stop function)
Description
Rail and overhead line grinding car
can be used both analogue and digitally. With SSF-09 control electronics (automatic start/stop function), Faulhaber motor and battery station.
With the rail and overhead line grinding car you can remove
- stuck oil and dirt residues
- deposits from traction tire abrasion
- oxide layers on rails, center conductors and contact wires
and thus achieve:
- significantly longer operating hours for vehicles
- safe current collection from rails, center conductors and contact wires
- trouble-free operation
The fully functional, mobile rail and overhead line grinding car for all H0e track and control systems was specially developed for removing stuck oil and dirt residues on rails, center conductors and contact wires. Even the finest dirt on the rail head can lead to significant operational disruptions.
By installing the innovative and reliable cleaning technology in a rail vehicle, even particularly inaccessible areas of your model system such as tunnels, shadow stations and tracks spanned by overhead wires can be cleaned without any problem.
The maintenance-free operating times of your rail vehicles are significantly increased and a safe current collection from the rail, center conductor and overhead wire is achieved.
The cleaning car is supplied with power via the track voltage and can be pulled or pushed by standard traction vehicles. It has no drive for movement.
The vehicle is equipped with close coupling kinematics and an NEM coupling receiving shaft. The power is supplied via the 4-point wheel contact set or the ski grinder on the bogie of the car. The cleaning technology is powered by a long-lasting and maintenance-free bell-armature motor (Faulhaber1).
The innovative SSF-09 control electronics (automatic start/stop function) works in a movement-oriented manner. When the car is moved on the powered track (pushed or pulled by a locomotive), the cleaning technology switches on automatically. If the moving, activated cleaning car comes to a stop (e.g. signal stop), the cleaning technology switches off automatically. The cleaning car can be used on analog and digitally controlled systems.
The battery station carried in the grinding car and charged via the track voltage buffers the motor of the cleaning technology in the event of a power failure on the rail (e.g. due to dirt). This means that the rail grinding car can maintain its cleaning effect even on short, powerless track sections.
Image shows H0 article!
can be used both analogue and digitally. With SSF-09 control electronics (automatic start/stop function), Faulhaber motor and battery station.
With the rail and overhead line grinding car you can remove
- stuck oil and dirt residues
- deposits from traction tire abrasion
- oxide layers on rails, center conductors and contact wires
and thus achieve:
- significantly longer operating hours for vehicles
- safe current collection from rails, center conductors and contact wires
- trouble-free operation
The fully functional, mobile rail and overhead line grinding car for all H0e track and control systems was specially developed for removing stuck oil and dirt residues on rails, center conductors and contact wires. Even the finest dirt on the rail head can lead to significant operational disruptions.
By installing the innovative and reliable cleaning technology in a rail vehicle, even particularly inaccessible areas of your model system such as tunnels, shadow stations and tracks spanned by overhead wires can be cleaned without any problem.
The maintenance-free operating times of your rail vehicles are significantly increased and a safe current collection from the rail, center conductor and overhead wire is achieved.
The cleaning car is supplied with power via the track voltage and can be pulled or pushed by standard traction vehicles. It has no drive for movement.
The vehicle is equipped with close coupling kinematics and an NEM coupling receiving shaft. The power is supplied via the 4-point wheel contact set or the ski grinder on the bogie of the car. The cleaning technology is powered by a long-lasting and maintenance-free bell-armature motor (Faulhaber1).
The innovative SSF-09 control electronics (automatic start/stop function) works in a movement-oriented manner. When the car is moved on the powered track (pushed or pulled by a locomotive), the cleaning technology switches on automatically. If the moving, activated cleaning car comes to a stop (e.g. signal stop), the cleaning technology switches off automatically. The cleaning car can be used on analog and digitally controlled systems.
The battery station carried in the grinding car and charged via the track voltage buffers the motor of the cleaning technology in the event of a power failure on the rail (e.g. due to dirt). This means that the rail grinding car can maintain its cleaning effect even on short, powerless track sections.
Image shows H0 article!
Specifications
CouplerShaft NEM 362 with KK kinematics
Length over buffer185 mm
Reference data
Manufacturer’s item no.9775
EAN–
ReleasedQ4/2018
ScaleH0e (1:87)
Era–
Power systemDC
Railway company–
Market value
Coming soon
The modellbahn·fokus market value index will in future show reference values for both available and discontinued models — transparently derived and continuously updated.
Comments from members (0)
No comments on this model yet – be the first.
Only signed-in members can write comments. Sign in now
Report an error or suggest an addition
Do you know this model better? The editors review every note.
Please sign in to suggest a correction or an addition.



