Description
Electric multiple unit, Pullman IIm, RhB ABe 4/4 III No. 52, Brusio, Bernina, Ep. VI, prototype condition around 2013, LokSound, Panto
• Structure and frame made of weatherproof plastic
• Multi-colored interior
• Multi-colored driver's cab with locomotive driver figure
• Separately attached handle bars and steps
• 2 Bühler motors
• Ball-bearing axles
• Drive on four axles
• LokSound 5 XL decoder for DCC, Motorola, M4 and Selectrix operation
• Independent registration at control centers with RailComPlus or mfx functionality
• PowerPack storage capacitor for uninterruptible power supply
• 50mm speaker with large sound capsule for maximum sound enjoyment
• Digitally raised and lowered roof pantographs with ESU servos
• Digitized original sounds
• Sensor-controlled noises when cornering
• Direction-dependent light change 3+1 with warm white LEDs, train-side headlights can be switched off
• Direction-dependent light change 3+1 with warm white LEDs, for operation in double traction, front lighting on each side can be switched off separately
• Driver's cab and passenger compartment lighting can be switched separately
• Brake sparks when braking
• Minimum passable radius = 600 mm
• Length over buffers = approx. 690 mm
The weatherproof Pullman model has all the prototypical details and is handcrafted using a mixed plastic and metal construction. The front handlebars and hose couplings consist of individually attached parts and are assembled at the factory. The railcars are manufactured slightly shorter than the original in order to enable operation on all standard track radii (from 600 mm). The body receives a hard-wearing paint finish for an even more prototypical finish. Paintwork and addresses correspond to the respective construction conditions. The multi-part and multi-colored painted driver's cabs and passenger compartments are atmospherically illuminated by warm white LEDs. Of course, you can also switch all prototypical headlights in digital operation.
The metal roof pantographs are acoustically accompanied by original sound and are smoothly raised and lowered by high-quality ESU servos. You can digitally set the height to which the pantographs should extend.
A powerful seven-pole Bühler motor works in each of the two bogies, which transmits its power via ball-bearing shafts to both axles of the bogies with low wear. The axles have wheels made of stainless steel and are also guided in ball bearings. A three-point mounting of the bogies ensures that all wheels are in permanent contact with the rail and thus safe power consumption at all times.
Nevertheless, the ESU LokSound 5 XL digital decoder is equipped with a “PowerPack” energy storage device at the factory, which guarantees a reliable power supply at all times, even on the dirtiest tracks in the garden. The digital equipment with several acoustic functions that are new in the garden railway sector allows you to experience your system in a completely new way. The powerful original sound is emitted to the outside world by a large 50mm speaker with a sound capsule.
Innovative sensors cause the typical squeaking noise to be heard in curves depending on the speed. The railcar has LGB-compatible couplings at the ends.
• Structure and frame made of weatherproof plastic
• Multi-colored interior
• Multi-colored driver's cab with locomotive driver figure
• Separately attached handle bars and steps
• 2 Bühler motors
• Ball-bearing axles
• Drive on four axles
• LokSound 5 XL decoder for DCC, Motorola, M4 and Selectrix operation
• Independent registration at control centers with RailComPlus or mfx functionality
• PowerPack storage capacitor for uninterruptible power supply
• 50mm speaker with large sound capsule for maximum sound enjoyment
• Digitally raised and lowered roof pantographs with ESU servos
• Digitized original sounds
• Sensor-controlled noises when cornering
• Direction-dependent light change 3+1 with warm white LEDs, train-side headlights can be switched off
• Direction-dependent light change 3+1 with warm white LEDs, for operation in double traction, front lighting on each side can be switched off separately
• Driver's cab and passenger compartment lighting can be switched separately
• Brake sparks when braking
• Minimum passable radius = 600 mm
• Length over buffers = approx. 690 mm
The weatherproof Pullman model has all the prototypical details and is handcrafted using a mixed plastic and metal construction. The front handlebars and hose couplings consist of individually attached parts and are assembled at the factory. The railcars are manufactured slightly shorter than the original in order to enable operation on all standard track radii (from 600 mm). The body receives a hard-wearing paint finish for an even more prototypical finish. Paintwork and addresses correspond to the respective construction conditions. The multi-part and multi-colored painted driver's cabs and passenger compartments are atmospherically illuminated by warm white LEDs. Of course, you can also switch all prototypical headlights in digital operation.
The metal roof pantographs are acoustically accompanied by original sound and are smoothly raised and lowered by high-quality ESU servos. You can digitally set the height to which the pantographs should extend.
A powerful seven-pole Bühler motor works in each of the two bogies, which transmits its power via ball-bearing shafts to both axles of the bogies with low wear. The axles have wheels made of stainless steel and are also guided in ball bearings. A three-point mounting of the bogies ensures that all wheels are in permanent contact with the rail and thus safe power consumption at all times.
Nevertheless, the ESU LokSound 5 XL digital decoder is equipped with a “PowerPack” energy storage device at the factory, which guarantees a reliable power supply at all times, even on the dirtiest tracks in the garden. The digital equipment with several acoustic functions that are new in the garden railway sector allows you to experience your system in a completely new way. The powerful original sound is emitted to the outside world by a large 50mm speaker with a sound capsule.
Innovative sensors cause the typical squeaking noise to be heard in curves depending on the speed. The railcar has LGB-compatible couplings at the ends.
Specifications
Digital-DecoderESU Locomotive Sound
Energy StorageYes
MotorBühler-Motor
Anzahl angetriebene Achsen4
Length over buffer690 mm
Navigable minimum radius600 mm
Interior Fittingswith arranged interior
Interior Fittingswith interior lighting
Interior Fittingsdigital control of cabin light
HeadlightsSchweizer Lichtwechsel
LED Top illuminationYes
SoundYes
Reference data
Manufacturer’s item no.30394
EAN4044645303948
ReleasedQ2 / 2022
ScaleG
EraVI
Power systemDC
Railway companyRhB
Market value
Coming soon
The modellbahn·fokus market value index will in future show reference values for both available and discontinued models — transparently derived and continuously updated.
Comments from members (0)
No comments on this model yet – be the first.
Only signed-in members can write comments. Sign in now
Report an error or suggest an addition
Do you know this model better? The editors review every note.
Please sign in to suggest a correction or an addition.



