Description
Specially designed to cope with, high-current, solenoid point-motors, the YD8008 is our 8-fold solenoid decoder with intelligent CDU.
It presents the following features:
Eight independent 9.5Amp solenoid outputs
Smart, 9400 uF CDU, monitoring charge levels for safe and powerful switching
Only 380 mA power consumption during charging
Very simple basic-setup (base address), by pressing the programming button and switching the desired turnout address
No complicated CV settings.
Clear-text configuration based upon our new ES-Link technology.
With our YD9101-Config or YD7100-Command, configuration can be done via built-in web interface. No need for PC-software or Phone/Tablet Apps !
- or -
when using the classic Windows PC interface, the YD9100 config-USB-stick as well as our YD6016LN can provide the configuration.
Eight address to output mappings, each mapping can a free choice address which can switch any and every output
Sequential output activation based upon pulse time and CDU charge level.
CDU startup delay adjustable to prevent tripping short circuit protection in boosters
Very modest power supply requirements. Even for SEEP/Gaugemaster motors a 15V/500mA wall wart is more than enough.
Not suitable for motorized point motors. For these motors, use our YD8116. This also counts for MTB point motors.
For two-wire solenoid motors, like Kato, adapter YD6940 should be used.
It presents the following features:
Eight independent 9.5Amp solenoid outputs
Smart, 9400 uF CDU, monitoring charge levels for safe and powerful switching
Only 380 mA power consumption during charging
Very simple basic-setup (base address), by pressing the programming button and switching the desired turnout address
No complicated CV settings.
Clear-text configuration based upon our new ES-Link technology.
With our YD9101-Config or YD7100-Command, configuration can be done via built-in web interface. No need for PC-software or Phone/Tablet Apps !
- or -
when using the classic Windows PC interface, the YD9100 config-USB-stick as well as our YD6016LN can provide the configuration.
Eight address to output mappings, each mapping can a free choice address which can switch any and every output
Sequential output activation based upon pulse time and CDU charge level.
CDU startup delay adjustable to prevent tripping short circuit protection in boosters
Very modest power supply requirements. Even for SEEP/Gaugemaster motors a 15V/500mA wall wart is more than enough.
Not suitable for motorized point motors. For these motors, use our YD8116. This also counts for MTB point motors.
For two-wire solenoid motors, like Kato, adapter YD6940 should be used.
Reference data
Manufacturer’s item no.YD8008
EAN6091016199134
ReleasedMärz 2023
ScaleNeutral
Era–
Power system–
Railway company–
Market value
Coming soon
The modellbahn·fokus market value index will in future show reference values for both available and discontinued models — transparently derived and continuously updated.
Comments from members (0)
No comments on this model yet – be the first.
Only signed-in members can write comments. Sign in now
Report an error or suggest an addition
Do you know this model better? The editors review every note.
Please sign in to suggest a correction or an addition.



