Description
YaMoRC standard current-sensing feedback module with RocoBus / XBus Interface
It presents:
- 16 current-sensing detectors, arranged in two independent blocks of 8, each with their own Common
- 2 Amp continuous current per detector, 8 Amps in total combined over the 16 detectors on the whole module
- 5 Amp short duration overload (100ms) capable per detector.
- 1mA current sensitivity
- Capacitive input filter on every input, to suppress noise on long cables and track-sections
- Configurable on- and off-delay setting for each input for optimal de-bouncing in case of non optimal wheel-track contact
- Every input individually configurable for various actions like feedback, turnout toggle, turnout throw, turnout close
- Every input individually configurable for turnout-address
- ES-IN-Link for direct connection of up to 4 additional YD6016ES modules (effectively creating a 80 input RBus module)
- ES-IN-Link connection to other ES-Link enabled modules for module-configuration
- ES-IN-Link connection to YD9101 for web-based configuration
- USB connection with one Virtual COM port for the YD.Command protocol
- Firmware updatable over USB
- Power supply directly from RBus / XBus ( or USB for easy configuration and updating on a PC )
It presents:
- 16 current-sensing detectors, arranged in two independent blocks of 8, each with their own Common
- 2 Amp continuous current per detector, 8 Amps in total combined over the 16 detectors on the whole module
- 5 Amp short duration overload (100ms) capable per detector.
- 1mA current sensitivity
- Capacitive input filter on every input, to suppress noise on long cables and track-sections
- Configurable on- and off-delay setting for each input for optimal de-bouncing in case of non optimal wheel-track contact
- Every input individually configurable for various actions like feedback, turnout toggle, turnout throw, turnout close
- Every input individually configurable for turnout-address
- ES-IN-Link for direct connection of up to 4 additional YD6016ES modules (effectively creating a 80 input RBus module)
- ES-IN-Link connection to other ES-Link enabled modules for module-configuration
- ES-IN-Link connection to YD9101 for web-based configuration
- USB connection with one Virtual COM port for the YD.Command protocol
- Firmware updatable over USB
- Power supply directly from RBus / XBus ( or USB for easy configuration and updating on a PC )
Reference data
Manufacturer’s item no.YD6016RB-CS
EAN6091007183159
ReleasedQ3 / 2023
ScaleNeutral
Era–
Power system–
Railway company–
Market value
Coming soon
The modellbahn·fokus market value index will in future show reference values for both available and discontinued models — transparently derived and continuously updated.
Comments from members (0)
No comments on this model yet – be the first.
Only signed-in members can write comments. Sign in now
Report an error or suggest an addition
Do you know this model better? The editors review every note.
Please sign in to suggest a correction or an addition.



