Description
The control module for 2 light signals - a main and a distant signal - with LEDs and a common positive pole or incandescent lamps, if these together do not consume more than 200 mA of current. It is therefore suitable for all Viessmann signals and signals from other manufacturers - with the exception of Viessmann signals with the new multiplex technology. It can be switched conventionally using the 5545, 5546 and 5547 button control panels, or directly digitally with the Märklin-Motorola and NMRA-DCC formats - the decoder is integrated. It is equipped with the newly developed Viessmann signal bus and can be configured for the following applications: - two-aspect or multiple-aspect light signal A two-aspect main signal with the signal images "drive" and "stop" requires the push button control panel 5547 (for four signals) or one Digital address. A three- or four-aspect signal with the additional terms "slow travel" and "maneuvering ban canceled" requires the control panel 5546 (three-aspect, two signals) or 5545 (four-aspect, two signals) or two addresses in digital mode. - Station signal or block signal When configured as a block signal, the module reacts automatically to the transmitted route status. This function requires track occupancy reports with permanent contacts, such as an isolated track side on Märklin tracks or two-rail track sections monitored with the track occupancy detector 5206. Up to two monitored sections are required per signal section. In this operating mode, the module automatically switches to "Drive" when the following section is reported as "free" via the signal bus. If one of the two sections is occupied, the module switches to "Halt". - Your own distant signal or distant signal on the mast The signal module controls the main signal and the associated distant signal or the distant signal of a subsequent signal if it is attached to your own mast. In this case the distant signal is switched to prototypically dark at "Halt". - Interrupt the traction current at "Halt" or switch on the brake generator. With the plug-in train control relay 5228, the module can automatically stop the trains. This can be done either by switching off the traction current before the signal or, in the case of digital systems, even more prototypically by switching to the 5232 brake module (for Märklin-Motorola) or a brake generator (for NMRA-DCC). - Coupled signal The configuration can be used to define whether a signal may only need to display "Stop" and "Slow travel". In this case, too, the module only requires the 5547 button control panel or a digital address. The logic in the control module ensures that the red button always wins when several buttons are pressed at the same time, both for control via button control panels and via contact tracks. Soft light change between the signal images. The control module 5224 replaces the digital control modules 5224, 5225, 5226.
Specifications
Dimensions (LxWxH)115x55x38
Product LineDIGITAL 2
CompatibilityDCC
CompatibilityMotorola
Belastung Lichtausgang200 mA
Reference data
Manufacturer’s item no.5224
EAN4026602052243
ScaleNeutral
Era–
Power systemall
Railway company–
Market value
Coming soon
The modellbahn·fokus market value index will in future show reference values for both available and discontinued models — transparently derived and continuously updated.
Comments from members (0)
No comments on this model yet – be the first.
Only signed-in members can write comments. Sign in now
Report an error or suggest an addition
Do you know this model better? The editors review every note.
Please sign in to suggest a correction or an addition.



