modellbahn·fokusThe digital reference archive of model railways · A project by Modellbahnshop Lippe
EN
Home› Manufacturers› Piko› 56122
Piko56122

Multiprotocol decoder hobby

Multi-protocol decoder Hobby 8-pin NEM 652

In the shop

Description

Hobby multi-protocol decoder with load control (DC/AC)

description
The PIKO locomotive decoder 56122 is a small, powerful multi-protocol decoder. It can be used in DCC and Motorola** digital systems and also runs in analogue mode with DC voltage or AC voltage and the direction of travel can be switched using an overvoltage pulse (Märklin* system).
The decoder operates at a frequency of 18.75 KHz and is therefore not only suitable for direct current motors, but also for coreless motors (e.g. Faulhaber, Maxon, Escap) up to a continuous current consumption of 1 A. Briefly higher inrush currents are well tolerated.
The motor characteristic is set via the minimum, average and maximum speed. The load control can be individually adapted to the various locomotive engines using control parameters.
The decoder has two lighting outputs that depend on the direction of travel.
The function keys f3 and f4 can be used to switch a shunting gear with an extended slow travel range and the acceleration/braking delay.
The decoder can be programmed via PIKO Digi-Power-Box, DCC and Märklin* controllers. All CV's can be programmed with all devices.
When delivered, the decoder automatically recognizes the data formats DCC and Motorola, as well as the respective analog operation with DC or AC voltage. However, the desired operating mode can also be set manually.

properties
• Regulated multiprotocol decoder for DCC and Motorola
• Suitable for DC and coreless motors up to 1 A
• Quiet motor running thanks to motor control at 18.75 KHz
• 14, 27, 28, 128 speed steps, depending on the data format
• Short (1-127) and long (128-9999) addresses
• NMRA Compliant
• Adjustable minimum, maximum and average speed
• Programming on the Main (DCC)
• Shunting gear (half speed) switchable via F3
• Acceleration/braking delay switchable via F4
• Direction-dependent lighting, dimmable, switchable via F0
• Responds to a DCC compliant braking signal or braking sections with DC voltage
• All outputs protected against short circuits
• Conventional DC or AC direct current operation with automatic switching to the respective operating mode
• All CV's are to be programmed with digital devices of the format DCC and Motorola
• Programmable in DCC mode by register, CV directly or page programming
• Updateable through flash memory

Size: 19*16*5mm

Specifications

Digital InterfaceNEM 652 digital decoder socket
Dimensions (LxWxH)19 x 16 x 5 mm

Reference data

Manufacturer’s item no.56122
EAN4015615561224
ScaleH0 (1:87)
Era–
Power system–
Railway company–

Market value

Coming soon

The modellbahn·fokus market value index will in future show reference values for both available and discontinued models — transparently derived and continuously updated.

Comments from members (0)

No comments on this model yet – be the first.

Only signed-in members can write comments. Sign in now

Report an error or suggest an addition

Do you know this model better? The editors review every note.

Please sign in to suggest a correction or an addition.