ESU59210.BULK
SC installation package Fx DCC/MM/SX, 8-pin
SC installation package Fx DCC/MM/SX, 8-pin
Description
The LokPilot 5 Fx is a function decoder without a motor output, making it ideal for installation in control cars or functional models. Because it supports DCC with RailCom® as well as Motorola® and Selectrix, it can be used with all common digital command stations. It shares its flexible function key assignment and diverse lighting effects with other LokPilot 5 decoders from ESU.
Operating Modes
The LokPilot 5 Fx is a multi-protocol decoder. It supports the DCC data format as well as Motorola® and Selectrix®. In DCC format, 14-128 speed steps are standard, as are 2- and 4-digit addresses. Up to 28 functions can be triggered. Thanks to RailComPlus®, the decoders register fully automatically with a compatible digital command station (e.g., ECoS).
It supports all DCC programming modes and can be operated and programmed with all DCC-compatible digital command stations. RailCom® allows reading CV values on the main track with suitable command stations. Auxiliary registers are available for command stations that can only program CVs 1-255 (e.g., ROCO® Multimaus).
Motorola users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola addresses enable the triggering of 16 functions. A built-in programming mode also allows reprogramming with the venerable Control Unit 6021.
The LokPilot 5 Fx decoder recognizes Märklin® braking sections as well as ZIMO HLU/ZACK braking commands and the Lenz ABC system. Braking with DCC brake modules or DC voltage is also possible. Furthermore, it will also stop when a Selectrix brake diode is present. An ABC shuttle train system enables automatic shuttling between two stations. Although this decoder doesn't have a motor output, this is still important for a function decoder to synchronize the control car and power car.
The LokPilot 5 FX decoder can be used on analog DC and AC layouts. The decoder switches between operating modes fully automatically "on-the-fly." In most cases, no configuration is required.
Functions
The LokPilot 5 FX is equipped with a surprisingly large number of function outputs. Depending on the interface version, each LokPilot 5 FX decoder offers at least 10 amplified function outputs, each with a 250mA output current. Versions with a PluX22 or 21MTC interface add four more outputs for controlling servos or logic-level outputs. All essential lighting functions are included. The brightness of each output can be adjusted separately.
Interoperability
The LokPilot 5 Fx is designed to work seamlessly with the LokSound 5 and LokPilot 5 decoders: For example, it is possible to equip the locomotive of a multiple unit with a LokSound 5 decoder and the control car with a LokPilot 5 Fx. Assuming the same address, both will behave identically. The identical CV layout simplifies the coordination of the two decoders.
Operating Modes
The LokPilot 5 Fx is a multi-protocol decoder. It supports the DCC data format as well as Motorola® and Selectrix®. In DCC format, 14-128 speed steps are standard, as are 2- and 4-digit addresses. Up to 28 functions can be triggered. Thanks to RailComPlus®, the decoders register fully automatically with a compatible digital command station (e.g., ECoS).
It supports all DCC programming modes and can be operated and programmed with all DCC-compatible digital command stations. RailCom® allows reading CV values on the main track with suitable command stations. Auxiliary registers are available for command stations that can only program CVs 1-255 (e.g., ROCO® Multimaus).
Motorola users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola addresses enable the triggering of 16 functions. A built-in programming mode also allows reprogramming with the venerable Control Unit 6021.
The LokPilot 5 Fx decoder recognizes Märklin® braking sections as well as ZIMO HLU/ZACK braking commands and the Lenz ABC system. Braking with DCC brake modules or DC voltage is also possible. Furthermore, it will also stop when a Selectrix brake diode is present. An ABC shuttle train system enables automatic shuttling between two stations. Although this decoder doesn't have a motor output, this is still important for a function decoder to synchronize the control car and power car.
The LokPilot 5 FX decoder can be used on analog DC and AC layouts. The decoder switches between operating modes fully automatically "on-the-fly." In most cases, no configuration is required.
Functions
The LokPilot 5 FX is equipped with a surprisingly large number of function outputs. Depending on the interface version, each LokPilot 5 FX decoder offers at least 10 amplified function outputs, each with a 250mA output current. Versions with a PluX22 or 21MTC interface add four more outputs for controlling servos or logic-level outputs. All essential lighting functions are included. The brightness of each output can be adjusted separately.
Interoperability
The LokPilot 5 Fx is designed to work seamlessly with the LokSound 5 and LokPilot 5 decoders: For example, it is possible to equip the locomotive of a multiple unit with a LokSound 5 decoder and the control car with a LokPilot 5 Fx. Assuming the same address, both will behave identically. The identical CV layout simplifies the coordination of the two decoders.
Specifications
Digital InterfaceNEM 652 digital decoder socket
Reference data
Manufacturer’s item no.59210.BULK
EAN2000004968687
ReleasedQ1/2021
ScaleH0 (1:87)
Era–
Power system–
Railway company–
Market value
Coming soon
The modellbahn·fokus market value index will in future show reference values for both available and discontinued models — transparently derived and continuously updated.
Comments from members (0)
No comments on this model yet – be the first.
Only signed-in members can write comments. Sign in now
Report an error or suggest an addition
Do you know this model better? The editors review every note.
Please sign in to suggest a correction or an addition.



