Description
LokSound 5 micro DCC Direct Kato USA »empty decoder«, with loudspeaker, gauge: N
The LokSound 5 micro DCC Direct Kato USA was specially developed for installation in N gauge vehicles of the Kato USA brand: In most diesel locomotives from this manufacturer based on the American model, this decoder can be installed instead of the standard analog board. Finally, these models can also be easily retrofitted with a LokSound decoder.
The LokSound 5 micro DCC Direct Kato USA with its dimensions of 60 mm x 10.1 mm is a pure DCC decoder and is supplied with a loudspeaker. (11 x 15 mm)
Operating modes
The LokSound 5 micro DCC Direct Kato USA is a "pure" DCC decoder. 14 to 128 speed levels are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus, the decoders register fully automatically with a suitable digital control center.
It can handle all DCC programming modes and thanks to RailCom, the CV values on the main track can be read out with suitable control centers. There are auxiliary registers for control centers that can only program CVs from 1-255.
The LokSound 5 micro DCC Direct Kato USA decoder recognizes the Märklin braking sections as well as ZIMO HLU / ZACK commands or the Lenz ABC system. Braking with DCC brake modules or with direct current is also possible. In addition, it also stops with a Selectrix brake diode.
An ABC shuttle train automation enables automatic commuting between two stations. The LokSound 5 micro DCC Direct Kato USA can be used on analog direct current railways.
The decoder switches between the operating modes fully automatically "on the fly". Usually nothing needs to be set.
Sound
The LokSound 5 micro DCC Direct Kato USA decoder can play up to 12 channels simultaneously. Each channel can be resolved with up to 16 bit / 31250 kHz and offers HiFi quality on your system. There is practically no difference to the original that can be heard. A Class-D audio amplifier with up to 3W output power controls the speakers, which can have an impedance between 4 ohms and 32 ohms. A 128 Mbit sound memory ensures sufficient capacity.
The volume of all individual sounds can be individually adjusted. The super-flexible sound engine without a rigid schedule allows the accurate simulation of all conceivable rail vehicles.
Functions
Despite its compact dimensions, the LokSound 5 micro DCC Direct Kato USA is equipped with an enormous number of function outputs. Two directly soldered SMD LEDs are provided for the headlights at the front and rear. For older models, two wired LEDs can alternatively be soldered in and switched separately. In addition, three additional amplified function outputs are available. All important light functions are available. The brightness of each output can be set separately.
Motor control
The motor control of the LokSound 5 micro DCC Direct Kato USA has a variably adjustable PWM clock frequency of 10kHz to 50kHz, which ensures super quiet operation, especially with bell-shaped armature motors - the typical "humming" is a thing of the past. The load control can also be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function enables the decoder to be automatically calibrated to the motor. The LokSound 5 micro DCC Direct Kato USA decoder delivers up to 0.75A motor current.
The LokSound 5 micro DCC Direct Kato USA was specially developed for installation in N gauge vehicles of the Kato USA brand: In most diesel locomotives from this manufacturer based on the American model, this decoder can be installed instead of the standard analog board. Finally, these models can also be easily retrofitted with a LokSound decoder.
The LokSound 5 micro DCC Direct Kato USA with its dimensions of 60 mm x 10.1 mm is a pure DCC decoder and is supplied with a loudspeaker. (11 x 15 mm)
Operating modes
The LokSound 5 micro DCC Direct Kato USA is a "pure" DCC decoder. 14 to 128 speed levels are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus, the decoders register fully automatically with a suitable digital control center.
It can handle all DCC programming modes and thanks to RailCom, the CV values on the main track can be read out with suitable control centers. There are auxiliary registers for control centers that can only program CVs from 1-255.
The LokSound 5 micro DCC Direct Kato USA decoder recognizes the Märklin braking sections as well as ZIMO HLU / ZACK commands or the Lenz ABC system. Braking with DCC brake modules or with direct current is also possible. In addition, it also stops with a Selectrix brake diode.
An ABC shuttle train automation enables automatic commuting between two stations. The LokSound 5 micro DCC Direct Kato USA can be used on analog direct current railways.
The decoder switches between the operating modes fully automatically "on the fly". Usually nothing needs to be set.
Sound
The LokSound 5 micro DCC Direct Kato USA decoder can play up to 12 channels simultaneously. Each channel can be resolved with up to 16 bit / 31250 kHz and offers HiFi quality on your system. There is practically no difference to the original that can be heard. A Class-D audio amplifier with up to 3W output power controls the speakers, which can have an impedance between 4 ohms and 32 ohms. A 128 Mbit sound memory ensures sufficient capacity.
The volume of all individual sounds can be individually adjusted. The super-flexible sound engine without a rigid schedule allows the accurate simulation of all conceivable rail vehicles.
Functions
Despite its compact dimensions, the LokSound 5 micro DCC Direct Kato USA is equipped with an enormous number of function outputs. Two directly soldered SMD LEDs are provided for the headlights at the front and rear. For older models, two wired LEDs can alternatively be soldered in and switched separately. In addition, three additional amplified function outputs are available. All important light functions are available. The brightness of each output can be set separately.
Motor control
The motor control of the LokSound 5 micro DCC Direct Kato USA has a variably adjustable PWM clock frequency of 10kHz to 50kHz, which ensures super quiet operation, especially with bell-shaped armature motors - the typical "humming" is a thing of the past. The load control can also be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function enables the decoder to be automatically calibrated to the motor. The LokSound 5 micro DCC Direct Kato USA decoder delivers up to 0.75A motor current.
Specifications
Data formatsDCC
Reference data
Manufacturer’s item no.58741
EAN4044645587416
ReleasedQ2/2021
ScaleN (1:160)
Era–
Power system–
Railway company–
Market value
Coming soon
The modellbahn·fokus market value index will in future show reference values for both available and discontinued models — transparently derived and continuously updated.
Comments from members (0)
No comments on this model yet – be the first.
Only signed-in members can write comments. Sign in now
Report an error or suggest an addition
Do you know this model better? The editors review every note.
Please sign in to suggest a correction or an addition.



