modellbahn·fokusThe digital reference archive of model railways · A project by Modellbahnshop Lippe
EN
Home› Manufacturers› Viessmann› 5206
Viessmann5206

Track occupancy detector, 8-fold

Track occupancy detector, 8-fold

In the shop

Description

The track occupancy detector monitors eight track sections and reports the track status via relay outputs. Two outputs (i.e. one relay switchover contact) for each track section report the track being free or occupied. The track occupancy detector works regardless of the direction of travel of the trains and with all power systems. This means that it can be used flexibly:

Display of occupied and free tracks in the switchboard.

Generation of track occupancy reports for processing in feedback decoders such as Viessmann 5211 and 1202.

Automatic control of entry and exit groups in parking yards (e.g. shadow stations).

Control of the signals from auto block sections.


This is how the track occupancy detector works:

The track occupancy detector 5206 supplies the track sections to be monitored with the
Driving voltage. To do this, it is placed between the driving transformer or digital center or booster
and switched the track. It recognizes the flow of electricity to the track when a
power-receiving vehicle (locomotive, illuminated wagon with its own
Pantograph) is located on this. With two-line systems, it is also possible
with the help of resistive lacquer (not to be confused with conductive silver lacquer!) the
Axle insulation of the wheel sets of unlit wagons to high resistance
bridge. As a result, the wagons become low power consumers and
can be detected by the current sensors of the track occupancy detector.

The track occupancy detector requires two power supplies. These must
be galvanically separated from each other, d. H. from two separate transformers
come. In addition to the traction current connection, the track occupancy detector must be connected to a
AC voltage transformer (e.g. Viessmann 5200) with an output voltage of
16 V can be connected.
The track occupancy detector also works when there is no traction voltage on the track. It then sends measuring pulses to the track via a built-in pulse generator. These are so short that a locomotive cannot drive off, but the track condition is reliably detected.
The sensitivity of the module depends on the level of the driving voltage. Ever
The lower the driving voltage, the lower the sensitivity of the module.
A relay is assigned to each track section, of which both the normally open contact
for busy reporting as well as the normally closed contact for vacant reporting led to the outside
are.

Specifications

Dimensions (LxWxH)195x60x42
Kontaktbelastbarkeit1 A

Reference data

Manufacturer’s item no.5206
EAN4026602052069
Released06/2016
ScaleNeutral
Era–
Power systemall
Railway company–

Documents

WWW Product videoYoutube Video

Market value

Coming soon

The modellbahn·fokus market value index will in future show reference values for both available and discontinued models — transparently derived and continuously updated.

Comments from members (0)

No comments on this model yet – be the first.

Only signed-in members can write comments. Sign in now

Report an error or suggest an addition

Do you know this model better? The editors review every note.

Please sign in to suggest a correction or an addition.