Schönwitz51430
Constant current source
2 pieces KSQ2 with cable 10mA constant current source with connecting cables
Description
2 x KSQ2 with cables, 10mA constant current source with connecting cables.
Save the resistors!
This "smart resistor" always supplies your LEDs with the correct current, even with AC voltage.
Our new version of the KSQ2 with connecting cables saves you the soldering work on this small circuit board – simply connect the pre-soldered cables to a suitable voltage source and your LEDs, and you're done!
The electronics in the KSQ2 limit the current to approximately 10mA, regardless of the supply voltage. Your LED will always shine brightly within a voltage range of 4V to 24V. Unlike the KSQ1, the KSQ2 can also be connected directly to your AC transformer.
One or more LEDs can be connected in series or parallel to the output of the KSQ. The higher the current, the brighter the LEDs, and vice versa. Be sure to check the maximum current rating of your LEDs.
The LEDs share the output current. The number of LEDs at the output in a series circuit is limited by the LED's specifications and the input voltage.
Example for 10mA: Input voltage from the transformer 16V – 1.5V voltage drop across the regulator = 14.5V maximum at the constant current source (CCS). A red LED, for example, has a forward voltage of approximately 2V. In a series circuit, 7 x 2V = 14V would be possible. A current of 10mA now flows through the series connection of the 7 red LEDs.
Technical Data:
Scope of delivery - 2 KSQ2 units with connecting cables
Set current approx. - 10mA
Operating voltage - 4V to 24V AC or DC
Dimensions L x W x H - approx. 11mm x 8mm x 3.5mm
Connecting cables - 100mm each
Weight - approx. 0.8g
Voltage drop across the controller - approx. 1.5V
Current tolerance - +/- 10% possible
Save the resistors!
This "smart resistor" always supplies your LEDs with the correct current, even with AC voltage.
Our new version of the KSQ2 with connecting cables saves you the soldering work on this small circuit board – simply connect the pre-soldered cables to a suitable voltage source and your LEDs, and you're done!
The electronics in the KSQ2 limit the current to approximately 10mA, regardless of the supply voltage. Your LED will always shine brightly within a voltage range of 4V to 24V. Unlike the KSQ1, the KSQ2 can also be connected directly to your AC transformer.
One or more LEDs can be connected in series or parallel to the output of the KSQ. The higher the current, the brighter the LEDs, and vice versa. Be sure to check the maximum current rating of your LEDs.
The LEDs share the output current. The number of LEDs at the output in a series circuit is limited by the LED's specifications and the input voltage.
Example for 10mA: Input voltage from the transformer 16V – 1.5V voltage drop across the regulator = 14.5V maximum at the constant current source (CCS). A red LED, for example, has a forward voltage of approximately 2V. In a series circuit, 7 x 2V = 14V would be possible. A current of 10mA now flows through the series connection of the 7 red LEDs.
Technical Data:
Scope of delivery - 2 KSQ2 units with connecting cables
Set current approx. - 10mA
Operating voltage - 4V to 24V AC or DC
Dimensions L x W x H - approx. 11mm x 8mm x 3.5mm
Connecting cables - 100mm each
Weight - approx. 0.8g
Voltage drop across the controller - approx. 1.5V
Current tolerance - +/- 10% possible
Specifications
Package content2 Stk.
Reference data
Manufacturer’s item no.51430
EAN4251319514306
ScaleNeutral
Era–
Power system–
Railway company–
Market value
Coming soon
The modellbahn·fokus market value index will in future show reference values for both available and discontinued models — transparently derived and continuously updated.
Comments from members (0)
No comments on this model yet – be the first.
Only signed-in members can write comments. Sign in now
Report an error or suggest an addition
Do you know this model better? The editors review every note.
Please sign in to suggest a correction or an addition.



