Description
LED SMD 0402 with enameled copper wire, red
Tiny LED (type 0402), already soldered with 0.15mm thin and insulated enamelled copper wire.
The enameled wires are dyed, the plus pole red and the minus pole black.
Technical specifications:
- Luminous color - red
- Connection cable - approx. 150mm long
- Polarity - plus pole red and minus pole black
- Enamelled copper wire diameter - 0.15mm
- Voltage - max. 2.0V
- current - max. 20mA
- Beam angle - approx. 120°
- Luminosity - about 40mcd
- Housing color - clear
LED dimensions - L x W x H (1.0mm x 0.5mm x 0.5mm)
Notes on using the LEDs
Operation on a floor model with a transformer. In order to be able to operate these LEDs on a standard transformer with an AC voltage output, you need a suitable series resistor (e.g. 4.7 KOhm) and a protective diode (e.g. 1N4148) in order to convert the AC voltage, which is harmful to the LED, into a DC voltage.
Operation in a mobile Car System model
The battery voltage of 1.2V or 2.4V is usually not sufficient to light up standard LEDs. You have to distinguish between the following cases.
Battery voltage 1.2V (vehicle with one battery cell) - cars and other small vehicles. You need a voltage converter for each LED color because red, yellow, orange and green LEDs require a forward voltage of 2.00V and white and blue LEDs require a forward voltage of 3.00V.
Battery voltage 2.4V (vehicle with two battery cells) - trucks and buses
Red, yellow, orange and green LEDs can be connected directly to the battery via a 100 ohm series resistor. White and blue LEDs require a forward voltage of 3.00V, which can only be provided by a voltage converter.
Tiny LED (type 0402), already soldered with 0.15mm thin and insulated enamelled copper wire.
The enameled wires are dyed, the plus pole red and the minus pole black.
Technical specifications:
- Luminous color - red
- Connection cable - approx. 150mm long
- Polarity - plus pole red and minus pole black
- Enamelled copper wire diameter - 0.15mm
- Voltage - max. 2.0V
- current - max. 20mA
- Beam angle - approx. 120°
- Luminosity - about 40mcd
- Housing color - clear
LED dimensions - L x W x H (1.0mm x 0.5mm x 0.5mm)
Notes on using the LEDs
Operation on a floor model with a transformer. In order to be able to operate these LEDs on a standard transformer with an AC voltage output, you need a suitable series resistor (e.g. 4.7 KOhm) and a protective diode (e.g. 1N4148) in order to convert the AC voltage, which is harmful to the LED, into a DC voltage.
Operation in a mobile Car System model
The battery voltage of 1.2V or 2.4V is usually not sufficient to light up standard LEDs. You have to distinguish between the following cases.
Battery voltage 1.2V (vehicle with one battery cell) - cars and other small vehicles. You need a voltage converter for each LED color because red, yellow, orange and green LEDs require a forward voltage of 2.00V and white and blue LEDs require a forward voltage of 3.00V.
Battery voltage 2.4V (vehicle with two battery cells) - trucks and buses
Red, yellow, orange and green LEDs can be connected directly to the battery via a 100 ohm series resistor. White and blue LEDs require a forward voltage of 3.00V, which can only be provided by a voltage converter.
Specifications
Dimensions (LxWxH)1,0 x 0,5 x 0,5 mm
Package content10 Stk.
Reference data
Manufacturer’s item no.50200
EAN4251319502006
ScaleNeutral
Era–
Power system–
Railway company–
Market value
Coming soon
The modellbahn·fokus market value index will in future show reference values for both available and discontinued models — transparently derived and continuously updated.
Comments from members (0)
No comments on this model yet – be the first.
Only signed-in members can write comments. Sign in now
Report an error or suggest an addition
Do you know this model better? The editors review every note.
Please sign in to suggest a correction or an addition.



