Description
The ESU PowerPack Midi can be connected to all fifth generation ESU decoders (LokSound 5, LokPilot 5, LokPilot 5 Basic) and reliably supplies your locomotive with energy when driving over dirt spots and long switch routes.
With the help of its energy storage (with 6x1 Farad capacity), both the noise and the light and motor functions are buffered, ensuring that your models can continue to drive without power for up to 3 seconds, depending on power consumption.
The PowerPack Midi, which is equipped with a microcontroller for the first time, has an integrated charging circuit and is controlled by the decoder. It can therefore remain in the locomotive during programming. The charging current is also limited to prevent excessive strain on your booster if multiple models are in use. The buffer time can be limited using a CV on the decoder side, so that red signals also lead to an exact signal stop. The output voltage is adjusted fully automatically to the rail voltage by the microcontroller in order to avoid flickering of the lighting when buffering is activated.
The space requirement of the PowerPack Midi of approx. 20.5 mm x 13.5 mm x 14.5 mm must be taken into account when installing. A 3-pin cable connection is required between the decoder and PowerPack Midi.
6*1F/2.7V,
20.5 x 13.5 x 14.5mm
With the help of its energy storage (with 6x1 Farad capacity), both the noise and the light and motor functions are buffered, ensuring that your models can continue to drive without power for up to 3 seconds, depending on power consumption.
The PowerPack Midi, which is equipped with a microcontroller for the first time, has an integrated charging circuit and is controlled by the decoder. It can therefore remain in the locomotive during programming. The charging current is also limited to prevent excessive strain on your booster if multiple models are in use. The buffer time can be limited using a CV on the decoder side, so that red signals also lead to an exact signal stop. The output voltage is adjusted fully automatically to the rail voltage by the microcontroller in order to avoid flickering of the lighting when buffering is activated.
The space requirement of the PowerPack Midi of approx. 20.5 mm x 13.5 mm x 14.5 mm must be taken into account when installing. A 3-pin cable connection is required between the decoder and PowerPack Midi.
6*1F/2.7V,
20.5 x 13.5 x 14.5mm
Reference data
Manufacturer’s item no.54674
EAN4044645546741
ScaleNeutral
Era–
Power system–
Railway company–
Market value
Coming soon
The modellbahn·fokus market value index will in future show reference values for both available and discontinued models — transparently derived and continuously updated.
Comments from members (0)
No comments on this model yet – be the first.
Only signed-in members can write comments. Sign in now
Report an error or suggest an addition
Do you know this model better? The editors review every note.
Please sign in to suggest a correction or an addition.



